IGPS-1042GP - 6-port Unmanaged GbE Switch

In stock
SKU
IGPS-1042GP
Brand: ORing

Industrial 6-port unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 2x100/1000Base-X, SFP socket, 24VDC power input

Enquire Now
Enquire about this product:

IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with a P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports a wide range of 12~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 75°C can satisfy most of the operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet applications.

  • IGPS-1042GP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • Advanced PoE power boost technology to support dual 24VDC power inputs
  • SFP port supports 100Base-FX and 1000Base-X speed
  • Supports auto-negotiation and auto-MDI/MDI-X
  • Supports store and forward transmission
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
  • Supports Jumbo Frame up to 10K Bytes
Physical Ports  

10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX

4

100/1000Base-X SFP port

2
Technology  
Ethernet Standards  

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

MAC Table 1K MAC addressessses
Processing Store-and-Forward
LED Indicators  

Power indicator

Green : Power LED x 2

Fault Indicator

Amber : Indicates PWR1 or PWR2 failure occurred

10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)

Green for port Link/Act.
Green for PoE power injected

100/1000Base-X SFP port indicator (P5 ~ P6)

Green for port Link/Act.

SFP Speed DIP-Switch

 

DIP-Switch 1/2

DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps

Relay Output DIP-Switch

 

DIP-Switch 1

Power-1 failed warning : (ON) enable, (OFF) disable

DIP-Switch 2

Power-2 failed warning : (ON) enable, (OFF) disable

Fault contact  
Relay

Relay output to carry capacity of 1A at 24VDC

Power  
Redundant Input Power

Dual DC inputs. 12~57VDC on 6-pin terminal block.

Power consumption (Typ.)

7 Watts

PoE Power budget

60Watts at 12~24VDC, 120Watts at 24~57VDC

Overload current protection

Present

Reverse polarity protection

Present

Physical Characteristics

 
Enclosure IP-30
Dimensions (W x D x H)

41 (W) x 94.9 (D) x 144.3(H) mm (1.61 x 3.74 x 5.68 inches)

Weight (g)

650 g

Environmental  
Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals  
EMI

FCC Part 15, CISPR (EN55032) class A, EN55024

EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6

Safety

EN60950-1

Warranty 5 years