IGPS-1080-24V - 8-port unmanaged PoE Ethernet switch
Industrial 8-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., 24VDC power inputs, Isolation version
Enquire Now
Enquire about this product:
- IGPS-1080-24V-I provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
- Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
- Supports Isolation protection
- Supports jumbo frame up to 9.6KBytes
- Supports dual 24VDC power inputs for power redundancy
- Supports auto-negotiation and auto-MDI/MDI-X
- Supports store and forward transmission
- Supports flow control
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 With P.S.E. | 8 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 4K MAC addresses |
| Processing | Store-and-Forward |
| Jumbo Frame | Up to 9.6KBytes |
| LED Indicators | |
| Power Indicator | Green : Power LED x 2 |
| Fault Indicator | Amber : Indicate PWR1 or PWR2 failure |
| 10/100/1000Base-T(X) RJ45 port and PoE indicator | Green for port Link/Act. Green for PoE power injected. |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| DIP-Switch | |
|
DIP-Switch 1 |
Power-2 failed warning : (ON) enable, (OFF) disable |
|
DIP-Switch 2 |
Power-1 failed warning : (ON) enable, (OFF) disable |
| Power | |
|
Redundant Input power |
Dual DC inputs 24~36VDC on 6-pin terminal block. |
|
Power consumption (Typ.) |
13 Watts |
|
PoE Power Budget |
120 Watts |
|
Overload current protection |
Present |
|
Reverse polarity protection |
Present |
| Physical Characteristic | |
|
Enclosure |
IP-30 |
|
Dimension (W x D x H) |
41(W) x 94.9(D) x 144.3(H) mm |
|
Weight (g) |
686 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory approvals | |
| EMI | FCC Part 15, CISPR (EN55032) class A, E-MARK |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Warranty | 5 years |
