IGPS-1080 - 8 port unmanaged PoE Ethernet switch
Industrial 6-port unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 2x100/1000Base-X, SFP socket, 24VDC power input
Enquire Now
Enquire about this product:
- IGPS-1042GP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
- Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
- Advanced PoE power boost technology to support dual 24VDC power inputs
- SFP port supports 100Base-FX and 1000Base-X speed
- Supports auto-negotiation and auto-MDI/MDI-X
- Supports store and forward transmission
- Supports flow control
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
- Supports Jumbo Frame up to 10K Bytes
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 With P.S.E. | 8 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
| Switching Bandwidth | 16Gbps |
| MAC Table | 4K MAC addresses |
| Processing | Store-and-Forward |
| Jumbo Frame | 9KBytes |
| LED Indicators | |
| Power Indicator | Green : Power LED x 2 |
| Fault Indicator | Amber : Indicate PWR1 or PWR2 failure |
| 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator | Green for port Link/Act. Green for PoE power injected. |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| DIP-Switch | |
| DIP-Switch 1 | Power-1 failed warning : (ON) enable, (OFF) disable |
| DIP-Switch 2 | Power-2 failed warning : (ON) enable, (OFF) disable |
| Power | |
| Redundant Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block. |
| Power consumption (Typ.) | 8 Watts (power device not included) |
| PoE Power budget | 180Watts |
| Overload current protection | Present |
| Reverse polarity protection | Present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) |
26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch) |
|
Weight (g) |
442g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory approvals | |
| EMC | CE EMC (EN55024,EN 55032), FCC Part 15 B |
| EMI | EN55032, CISPR 32, EN61000-3-2, EN61000-3-3, FCC Part 15 B class A |
| EMS |
EN55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF), IEC/EN 61000-4-11 (DIP) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 665,276 |
| Warranty | 5 years |
