IGS-RX164GP+ - 20 port managed switch
Industrial advanced Layer 3 20-port managed Gigabit Ethernet switch
- Support routing protocols – Static routing, RIP v1/v2, OSPF, PIM-SM, PIM-DM, VRRP
- Support TSN freature - IEEE 802.1AS for timing & Synchronization, Qav, Qat
- Support O-Ring(recovery time < 30ms) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- Provided HTTPS/SSH protocol to enhance network security
- Support SNTP client
- Support application-based QoS management
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL and 802.1x User Authentication for security
- Support 10K Bytes Jumbo Frame
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Physical Ports | |
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
16 |
1G/2.5G/10GBase-X with SFP+ port |
4 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T |
MAC Table | 16k |
Priority Queues | 8 |
Packet Buffer | 2MB |
Flash Memory | 512Mbits |
DRAM Size | 8Gbits |
Jumbo frame | Up to 10K Bytes |
Processing | Store-and-Forward |
Switch Properties | Switching latency: 7 us Switching bandwidth: 112Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
Security Features |
Enable/disable ports, MAC based port security
|
Software Features |
Routing protocols – static routing, RIP v1/v2, OSPF, PIM-SM, PIM-DM, VRRP |
Network Redundancy |
O-Ring |
RS-232 Serial Console Port |
RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 |
LED Indicators | |
Power Indicator (PWR) |
Green : Power LED x 3 |
Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator (Ring) |
Green : Indicates that the system operating in O-Ring mode |
Fault Indicator (Fault) |
Amber : Indicate unexpected event occurred |
10/100/1000Base-T(X) RJ45 Port |
Green for Link/Act indicator |
1G/10GBase-X SFP+ Port Indicator |
Green for port Link/Act. |
Fault contact | |
Relay |
Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power |
Dual DC inputs, 12~48VDC on 6-pin terminal block |
Power consumption (Typ.) |
23 Watts |
Overload current protection |
Present |
Reverse polarity protection |
Present |
Physical Characteristics |
|
Enclosure | IP-30 |
Dimensions (W x D x H) |
96.4 x 170 x 180 mm |
Weight (g) |
1530 g |
Environmental | |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Temperature |
-40 to 60oC (-40 to140oF) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals | |
EMC |
CE EMC (EN 55024, EN 55032), FCC Part 15 B |
EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
EMS |
EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 8KV, Air 10KV), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT Power 2KV, Single 2KV), IEC/EN 61000-4-5 (Surge: Power 4KV, RJ45 4KV), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-31 |
Vibration |
IEC60068-2-6 |
Safety |
EN60950-1 |
Warranty | 5 years |
MTBF | TBD |