MVS 2623-C8SK - Intel Atom E3950, 8xPOE Vehicle PC
In stock
SKU:
MVS 2623-C8SK
Brand: Nexcom
Please fill in your details below, we will get back to you as soon as possible
8-CH PoE Mobile NVR
· Modular design for flexible I/O expansion
· Three SIM cards + dual WWAN modules support
· 8 x 10/100/1000 Mbps 802.3af PoE ports
· Built-in u-blox NEO-M8N module, optional Dead Reckoning support
· Intel Atom® x7, 4c, 2.0GHz E3950
· Dual removable SATA 3.0 SSD/HDD
· iButton for driver ID identification
· Built-in CAN 2.0B. Optional OBDII function (SAE J1939/J1708)
· Pattern number M531607 registered, an easy way to expand diverse I/O cards
CPU | Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) |
Memory | 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, default 4GB industrial grade memory |
Storage | 2 x 2.5” SATA 3.0 SSD/HDD, removable & hot swappable (optional lockable storage available) |
Expansio | 1 x full size mini-PCIe socket (USB 2.0) 1 x full size mini-PCIe socket (USB 2.0 + PCIe) 1 x half size mini-PCIe socket (USB 2.0 + PCIe) |
GNSS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available Built-in G-sensor |
Power over Ethernet | 8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W |
Security | TPM in option |
I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health 1 x Reset button 1 x USB type A USB 2.0 port 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 1 x externally accessible SIM card sockets 2 x antenna holes for WWAN/WLAN/BT/GPS |
I/O Interface-Rear | 8 x RJ45 10/100/1000 Mbps PoE ports with LED 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED 1 x 9~36VDC input with ignition and 40W typical power consumption 2 x USB type A USB 3.0 port 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x HDMI port, resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS-232 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable) 1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton 1 x 16-pin terminal block connector - 1 x CAN Bus 2.0B (on board) - 1 x OBDII from optional VIOB-CAN-03 module (SAE J1939) - 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module - 8 x programmable GPIO (4 x Digital inputs in default) Input voltage (source type): 5VDC TTL (default) Input voltage (external type): 3 ~ 12VDC (4 x Digital outputs in default) Digital output (source type): 5VDC TTL (default), max current: 20mA Digital output (external type): 3 ~ 24VDC, max current: 150mA 1 x externally acessible SIM card socket and 1x internal SIM card socket selectable |
Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
Rechargeable Battery (option) | Lithium-ion Polymer Nominal capacity 1100mAh Maximum charge current 1.0CmA |
Operating System | Windows 10 64-bit only, Linux YOCTO |
Dimensions | 260mm (W) x 196mm (D) x 79.6mm (H) (10.24” x 7.72” x 3.13”) 4kg |
Environment | Operating temperatures: -30°C~70°C (w/ industrial SSD) with air flow Storage temperatures: -40°C~80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): [email protected]~500 Hz (in operation, HDD), [email protected]~500 Hz (in operation, SSD) Vibration (SSD/HDD): - Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure - Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD/HDD): - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=7 |
Certifications | CE approval, FCC Class A, E13 Mark |